GPMPUMP.com Home | Site Map
 

 
 
Series DD - Performance Data

The SSP Dual Disc pump is ideal for solids handling. The flow path through the pump minimises the risk of blockage and allows the passage of solids, rags and fibrous media.

  • Flow rates up to 52 m3/h
  • Differential pressures up to 3 bar
  • Sludge thickness content up to 10%
  • Suction lift up to 6 meters max.
 
QUICK LINKS
Overview
Basic Design
Product Images
Performance Data
Specification Options
Literature & IOM
   
 
Reduced Lifecycle Cost
The Dual Disc design with its cost effective easy maintenance eliminates the shaft sealing and valve problems inherent in other pump types on arduous duties. Where dry running and high spares costs are known
problems with other pump technologies, such as Progressing Cavity pumps which are traditionally used on lift applications, the use of SSP Dual Disc pumps can result in a reduced lifecycle cost (LCC).		  
 
Performance Chart

 

Model
Capacities Max. GPM
Pressures Max. PSI
Temperature Max. °F
Casing Materials*
Diaphragm Materials**
DD50 (2")
90
30
120
Cast Iron
BUNA-N
DD75PS (3")
210
45
120
Cast Iron
BUNA-N
DD100PS (4")
210
45
120
Cast Iron
Neoprene
DD150PS (6")
420
45
120
Cast Iron
Neoprene***
* Other casing options available. **Other materials available. ***Consists of dual DD100PS units. Dimensions are for guidance only and should not be used for installation purposes. GPM Pumps, Inc. will supply certified drawings upon request. Dimensions in inches unless otherwise noted.

 

  
 
   
   
   
 
GPM Pumps, Inc.
110 Gateway Drive, Macon, GA 31210
Phone: (877) 476-3569 | E-Mail: info@gpmpump.com
©2006 GPM Pumps, Inc. All Rights Reserved