| |
| Pump Liquid End |
Series LS Pumps feature fully machined components
throughout to ensure proper alignment and fit. As standard,
the pump casing and suction cover are of cast type
CD4MCu with the casing featuring machined ASA150
flanged ports. Impellers are of 28% chrome iron to resist
abrasive wear and are threaded-on to allow for ease of
installation and removal. Other metallurgies are available
on request |
|
|
| |
| Pump Power End |
The pumps are provided with a heavy duty, one-piece,
bearing frame suitable for either direct or V-belt drive for
years of dependable, trouble-free service. A heavy-duty
shaft minimizes deflection. Heavy-duty radial and thrust
bearings are sized to handle the axial and radial loadings
experienced under severe pumping conditions. Grease
lubricated bearings are standard with oil-lubricated bearings
available as an option.
An integral drip basin is provided in the seal area for easy
removal of any leakage from flush fluids. |
|
|
| |
| Removable Shaft Sleeve |
| The pump features a removable shaft sleeve that can be
replaced when necessary without the need to replace
the entire shaft. |
|
|
| |
|
